Welcome To Jazeerabotics!

TinkerKit Mosfet Module

Be the first to review this product

Availability: In stock

Only 42 left

(45.01) SAR

Regular Price: $17.33

Special Price $11.98

TinkerKit Mosfet Module is available for purchase in increments of 1

Quick Overview

This module switches a high current load using a high power transistor. Unlike a mechanical relay, this is capable of high speed switching for use with PWM.

TinkerKit Mosfet Module

More Views

Details

Description: This module switches a high current load using a high power transistor. Unlike a mechanical relay, this is capable of high speed switching for use with PWM. Input: This module lets you control devices operating at a maximun of 24VDC with an Arduino pin. To wire the module, connect the power supply for your device (max 24 V) to the V+ and GND terminals. Connect the device to M+ and M-. Be aware of your circuit's polarity, you could damage your components if it is not wired correctly. Module Description: This module features an IRF520 power MOSFET transistor, a kick-back diode, a standard TinkerKit 3pin connector,a signal amplifier, a green LED that signals that the module is correctly powered and one yellow LED whose brightness depends on the input signal received by the module. This module is a ACTUATOR. The connector is an INPUT that must be connected to an OUTPUT on the TinkerKit Shield.

 

Code Example

 

/*
  based on Blink, Arduino's "Hello World!"
  Turns on a transistor on for one second, then off for one second, repeatedly.
  The MOSFET is on O1

 modified 15 jan 2011
 by Scott Fitzgerald

  This example code is in the public domain.
 */


#define O0 11
#define O1 10
#define O2 9
#define O3 6
#define O4 5
#define O5 3
#define I0 A0
#define I1 A1
#define I2 A2
#define I3 A3
#define I4 A4
#define I5 A5


void setup() {                
  // initialize the digital pin as an output.
  pinMode(O1, OUTPUT);     
}

void loop() {
  digitalWrite(O1, HIGH);   // turn the MOSFET on
  delay(1000);              // wait for a second
  digitalWrite(O1, LOW);    // turn the transistor off
  delay(1000);              // wait for a second
}

 

Datasheet


Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.