This is a segment LED bar without control chip. It has 10 segment LEDs, including of 8 green, 1 yellow and 1 red. It is compatible with bread board and can work with Arduino by adding some current limiting resistors. Since it has 10 pin, it may be complex to control. If you would like a modular segment LED bar, see the Grove – LED Bar.
|PAD||Power Dissipation Per Segment||100||mw|
|VR||Reverse Voltage Per Segment||5||V|
|IAF||Continuous Forward Current Per Segment||20||mA|
|IPF||Peak Forward Current Per Segment(Duty-0.1,1KHz)||90||mA|
|—||Derating Linear From 25°C Per Segment||0.5||mA/°C|
|TOPr||Operating Temperature Range||-30°C to 80°C|
|Tstg||Storage Temperature Range||-30°C to 85°C|
|Solder Temperature1/16 inch Below Seating Plane 3 Seconds at 250°C|
For any technical support or suggestion, please kindly go to our forum.
|Dimensions||50mm x 50mm x 13mm|